Search results

Rotational speed and load-carrying capacity are two mutual coupling factors which affect high precision and stable operation of a hydrostatic thrust bearing. The purpose of this paper is to study reasonable matching relationship between the rotational speed and the load-carrying capacity.

A mathematical model of relationship between the rotational speed and the load-carrying capacity of the hydrostatic bearing with double-rectangle recess is set up on the basis of the tribology theory and the lubrication theory, and the load and rotational speed characteristics of an oil film temperature field and a pressure field in the hydrostatic bearing are analyzed, reasonable matching relationship between the rotational speed and the load-carrying capacity is deduced and a verification experiment is conducted.

By increasing the rotational speed, the oil film temperature increases, the average pressure decreases and the load-carrying capacity decreases. By increasing the load-carrying capacity, the oil film temperature and the average pressure increases and the rotational speed decreases; corresponding certain reasonable matching values are available.

The load-carrying capacity can be increased and the rotational speed improved by means of reducing the friction area of the oil recess by using low-viscosity lubricating oil and adding more oil film clearance; but, the stiffness of the hydrostatic bearing decreases.

Data service (DS) is a special software service that enables data access in cloud environment and provides a unified data model for cross-origination data integration and data sharing. The purpose of the work is to automatically compose DSs and quickly generate data view to satisfy users' various data requirements (DRs).

The paper proposes an automatic DS composition and view generation approach. DSs are organized into DS dependence graph (DSDG) based on their inherent dependences, and DSs can be automatically composed using the DSDG according to user's DRs. Then, data view will be generated by interpreting the composed DS.

Experimental results with real cross-origination data sets show the proposed approaches have high efficiency and good quality for DS composition and view generation.

The authors propose a DS composition algorithm and a data view generation algorithm according to users' DRs.

Ride comfort is one of the important factors affecting passenger health. Therefore, the elevator industry usually uses the International Organization for Standardization (ISO) 18738-1 standard to evaluate elevator ride quality and optimize elevator design. However, this method has certain limitations in its evaluation of comfort due to the problem of boundary division. The ISO 2631-4 standard is used as a general method of comfort evaluation in the current rail transit system, but it has not been applied in the elevator industry. In order to explore the difference and connection between the two standards, the author aims to conduct a detailed analysis on this.

Based on the elevator internet, a large amount of measured data of normal and abnormal vibration of elevator car were collected and analyzed and preprocessed; based on ISO 18738-1:2012 standard and ISO 2631-4:2001 standard, the differences of ride comfort assessment methods in the two standards were analyzed, and the ride comfort assessment study of elevator under normal and abnormal vibration conditions was carried out.

The experimental results show that the comfort assessment results of ISO 2631-4:2001 standard and ISO18738-1:2012 standard are consistent under two vibration conditions. At the same time, ISO 2631-4:2001 can not only provide a more accurate quantitative description of comfort, but also roughly determine the comfort interval of each vibration, which can provide theoretical reference for elevator vibration classification and car comfort design.

The authors designed an Internet of Things (IOT)-based elevator vibration signal acquisition method to address the shortcomings of the previous elevator ride comfort assessment methods, which can realize the dynamic assessment of elevator ride comfort; by comparing the assessment results of elevator ride comfort under normal vibration and abnormal vibration, the feasibility of ISO 2631-4:2001 for elevator ride comfort assessment was fully verified. In addition, the experimental results also give the influence of abnormal vibration on elevator riding comfort under the stages of start-stop, uniform speed, acceleration and deceleration, which can provide theoretical support for elevator vibration suppression and comfort transformation.

The purpose of this paper is to examine the effects of internal corporate governance mechanisms on the capital structure decisions of Chinese-listed firms.

Using a large and more recent data set consisting of 2,386 Chinese-listed firms over the period from 1998 to 2012, the authors use different statistical methods (OLS, fixed effects and system GMM) to analyse the effects of firm-specific and corporate governance influences on capital structure.

The authors find that the proportion of independent directors and ownership concentration exert significant influence on the level of Chinese long-term debt ratios after controlling for firm-specific determinants and split share reforms. Further analysis separating the sample of this paper into state-owned enterprises (SOEs) and privately owned enterprises (POEs) suggests that ownership concentration in the hands of the state leads to decrease in debt ratios.

The finding implies that concentrated ownership in the hands of the state appears more efficient compared to their private counterparts in their monitoring role.

This paper extends prior literature, which has concentrated disproportionately on firm-specific influences on capital structure, to the effects of within-firm governance mechanisms on capital structure decisions. The paper contributes to the agency theory–capital structure discourse in an emerging country context where corporate governance system appears weak.

Currently heating and cooling in buildings is responsible for over 30% of the primary energy consumption in the United Kingdom with a similar amount in China. We analyze heat pumps and district thermal energy network for efficient buildings. Their advantages are examined (i.e., flexibility in choosing heat sources, reduction of fuel consumption and increased environmental quality, enhanced community energy management, reduced costs for end users) together with their drawbacks, when they are intended as means for efficient building heating and cooling.

A literature review observed a range of operating conditions and challenges associated with the efficient operation of district heating and cooling networks, comparing primarily the UK’s and China’s experiences, but also acknowledging the areas of expertise of European, the United States, and Japan. It was noted that the efficiency of cooling networks is still in its infancy but heating networks could benefit from lower distribution temperatures to reduce thermal losses. Such temperatures are suitable for space heating methods provided by, for example, underfloor heating, enhanced area hydronic radiators, or fan-assisted hydronic radiators. However, to use existing higher temperature hydronic radiator systems (typically at a temperatures of >70°C) a modified heat pump was proposed, tested, and evaluated in an administrative building. The results appears to be very successful.

District heating is a proven energy-efficient mechanism for delivering space heating. They can also be adaptable for space cooling applications with either parallel heating and cooling circuits or in regions of well-defined seasons, on flow and return circuit with a defined change-over period from heating to cooling. Renewable energy sources can provide either heating or cooling through, for example, biomass boilers, photovoltaics, solar thermal, etc. However, for lower loss district heating systems, lower distribution temperatures are required. Advanced heat pumps can efficiently bridge the gap between lower temperature distribution systems and buildings with higher temperature hydronic heating systems

This chapter presents a case for district heating (and cooling). It demonstrates the benefits of reduced temperatures in district heating networks to reduce losses but also illustrates the need for temperature upgrading where building heating systems require higher temperatures. Thus, a novel heat pump was developed and successfully tested.

The purpose of this paper is to develop digital flexible pre-assembly tooling system for fuselage panels.

First, the paper analyzes the technological characteristics of fuselage panels and then determines the pre-assembly object. Second, the pre-assembly positioning method and assembly process are researched. Third, the panel components pre-assembly flexible tooling scheme is constructed. Finally, the pre-assembly flexible tooling system is designed and manufactured.

This study shows the novel solution results in significantly smaller tooling dimensions, while providing greater stability. Digital flexible assembly is an effective way to reduce floor space, reduce delivery and production lead times and improve quality.

The tooling designed in this case is actually used in industrial application. The flexible tooling can realize the pre-assembly for a number of fuselage panels, which is shown as an example in this paper.

The paper suggests the fuselage panel pre-assembly process based on the thought including pre-assembly, the automatic drilling and riveting and jointing, and constructs a flexible tooling system for aircraft fuselage panel component pre-assembly.

It is widely accepted that business excellence comes from firm-specific factors. However, it is still unclear how institutional relatedness – the degree of embeddedness with the dominant institutions that confer resources and legitimacy, influences the business excellence of the firm. The purpose of this study is to explore the influence of three kinds of institutional relatedness, i.e. home government ties, initial public offerings (IPOs) and alliances with foreign firms, on the business excellence of Chinese firms.

This study uses a sample of firms enlisted on the “Most Respected Companies” rank in China during the period 2002–2015 and their paired firms who are absent from the list, by means of ordinary least square regression estimator, to explore the relationship between institutional relatedness and business excellence.

The empirical results suggest that IPOs and alliances with foreign firms significantly strengthen firms’ business excellence. Furthermore, home government ties have positive effects on outbound IPOs and alliances with foreign firms but hinder business excellence.

This study extends the business excellence literature by characterizing institutional rather than firm-specific factors from an institution-based view. It also enriches research on outcomes of institutional relatedness through investigating empirically its impact on business excellence. The findings provide new insights into the dual role of home government ties in achieving business excellence.

The purpose of this paper is to review the criminal enforcement of insider dealing cases in People's Republic of China's (PRC) securities market and to provide feasible suggestions for improvement for a more coherent and streamlined insider dealing regulatory framework in the PRC during the enforcement of China's new Securities Law (SL 2020) in March 2020.

Through analysing the previous literature on public interest theories and economic theories of regulation, this paper examines the necessity to regulate insider dealing in China with criminal law to ensure fairness and avoid monopolies in its securities market. The paper reviews the criminalising of severe insider dealing cases in China from the Nanking National Government in the 1920s to the inception of the securities market of the PRC in the 1990s to the present day. The investigation, prosecution, enforcement and trial of criminal offences of insider dealing in China are thoroughly examined.

The paper finds a tendency for over reliance on the investigation and the administrative judgement of the China Securities Regulatory Commission in criminal investigation, prosecution and trial in the PRC.

To the best of the authors’ knowledge, this paper is one of the first papers to critically and thoroughly analyse the criminal enforcement of insider dealing in China following the recent enforcement of China’s new Securities Law in March 2020.

Existing empirical studies emphasize the role of customer preference measurement accuracy (CPMA) on customized product quality while neglecting the role of manufacturing flexibility. However, the rise of web-based technology has highlighted consumer-manufacturer interaction in mass customization (MC). This paper explores the relationships between CPMA, manufacturing flexibility, customer participation and customized product quality, inspired by module decomposition and integration theory.

The study carried out a questionnaire survey of 241 directors who are specifically responsible for MC in the apparel industry in China and tested hypotheses with structural equation modeling (SEM).

CPMA has a direct positive influence on customized product quality and an indirect positive effect through manufacturing flexibility. Also, customer participation after placing an order (CPAPO) has a negative moderating effect on the linkage between CPMA and manufacturing flexibility.

A more dynamic relationship between CPMA and MF can be explored in the future, and the findings can be tested in other industries with more abundant data.

Manufacturing flexibility should be improved along with CPMA in MC. Also, disruptions caused by customer participation in the post-design stage should be noticed. In this context, better consumer service in the early design stage may be one possible solution.

First, the essential but unexplored mediating role of manufacturing flexibility is identified, adding knowledge to the consumer–manufacturer interaction literature in MC production. Second, module decomposition and integration are applied to unify consumers and manufacturers into one empirical model, enriched theoretical research on modular theory. Third, this study opens new discussions on the moderating role of customer participation.

In this paper, the authors examine the association between the amount of continuing professional education (CPE) hours per staff and audit quality in terms of discretionary accruals and audit opinion.

Several methodologies are adopted to test the hypotheses, including the ordinary least square (OLS) and logistic regression (Logistic). The authors also employ instrument variables regression with two least square (IVREG with 2SLS) and instrument variables probit model (IVProbit) to address the possible endogeneity and strengthen the validity of the main estimation results.

The main results show that there is a positive and significant relationship between CPE hours per staff and audit quality. As the authors grouped CPE into four areas (finance, auditing and accounting, tax, law and regulations and others) the results are more robust for the sub-sample “accounting and audit” and “others”. Moreover, the findings of this study suggest that CPE hours per staff do not affect audit quality significantly for Big4 audit firms compared to non-Big4 firms.

The sample size of the present study is quite small because the transparency reports of the audit firms in Turkey have been available since 2013 and the authors could not reach some auditor demographics at the individual level and some attributes at the audit firm level. Besides, some alternative audit quality measures, such as audit effort, audit fees are not employed because they are not disclosed.

This study contributes to the audit literature using Turkish audit firms. The authors believe that the setting of Turkey may yield interesting results because of the data it provides.